macOS device
Operating system: OS X 10.11 El Capitan or higher
Hardware: USB port to connect the USB config device.
No special hardware configurations are required for programming.
The operating system must be stable and run free of errors.
Optional: Online via SmartBridge
Locking devices can also be programmed online with a USB config
device. See
Programming of components with online upgrade [}46]
.
In this particular case, only the transponders need to be programmed
with the aid of the USB config device.
Tip:
If there should be no Windows or Android devices available for
programming new keys, it is recommended to programme additional
transponders as a reserve. These can then be assigned to networked
online locks at a later stage. See
Using keys without the USB config
device [}71]
for more information.
MobileKey (Manual)
1. Introduction
7 / 75
To Next Page
Loading...