Simplex 4100 User Manual

29
SECTION 6
NETWORK INTERFACE
INTRODUCTION
The Network Interface Option allows the 4100/4100+ to communicate with other FA panels or with a 2120 Multiplex
System (see Network Concepts [NET-91-500]).
NOTE: The 4100/4100+ acts as a transponder when connected to a 2120.
NETWORK (OR 2120) OPERATION DURING Walk Test

Status changes occurring as a result of a Walk Test

operation in a networked system are not communicated to
other members of the network (or a 2120). The Walk Test

is strictly a local 4100/4100+ operation. See Section 10
for Walk Test

procedures.
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes