Simplex 4100 - Page 97

To Previous Page

FA4-31-201

Ed 5 95

Simplex Plaza • Gardner, Massachusetts 01441-0001 U.S.A. (574-018)

firealarmresources.com

Main Page

Table of Contents3
Section 1 - System Overview9
Introduction9
System Operating Description10
Interface Panel10
Log in Procedure11
Log out Procedure12
Handling Abnormal Conditions13
Introduction15
Global Acknowledge Panel Operation During Alarm Conditions15
Interface Panel Showing Alarm Condition15
How to Silence the Alarm Signals16
How to Reset the System16
Individual Acknowledge Panel Operation During Alarm Conditions16
How to Silence the Alarm Signals17
How to Reset the System17
Essential Alarm Condition Keys17
Alarm Acknowledge Key17
Alarm Silence Key18
Alarm Silence Software Considerations18
System Reset Key19
If the Alarm Point Does Not Reset19
How to Disable a Point19
Introduction21
Global Acknowledge Panel Operation During Trouble Conditions21
Interface Panel Showing Trouble Condition21
Individual Acknowledge Panel Operation During Trouble Conditions22
Essential Trouble Condition Keys23
Trouble Acknowledge Key23
System Reset Key24
If the Trouble Does Not Reset24
How to Disable a Point with a Trouble Condition24
Trouble Indications for Truealarm Sensors25
Introduction25
Almost Dirty Indication26
Dirty Indication26
Excessively Dirty Indication26
Self-Test Abnormal Indication26
Introduction27
Global Acknowledge Panel Operation During Supervisory Service Conditions27
Interface Panel Showing Supervisory Service Condition27
Individual Acknowledge Panel Operation During Supervisory Service Conditions28
Essential Supervisory Service Condition Keys29
Supervisory Acknowledge Key29
Introduction31
RS-232 Port Access Levels31
The Video Terminal31
RS-232 Interface Default Protection Levels31
CRT Function Key Definitions32
Set-Up Procedure32
CRT Screen Displays32
CRT Main Menu Screen32
Function Key Definitions32
Acknowledge Screen33
CRT Main Menu Screen33
Log in Screen34
CRT Acknowledge Screen34
CRT Log in Screen34
Historical Log Screen35
Status Screen35
CRT Alarm Historical Log Screen35
CRT Status Screen35
The System Printer36
40-Character Line Width Printout36
Section 6 - Network Interface37
Introduction37
Network (or 2120) Operation During Walk Test37
Section 7 - Audio Systems39
Introduction39
General Information39
Audio Features39
System Operation39
Audio System Configurations39
Audio Control Led/Switch Module40
Voice Messages40
Voice Coded Digits40
Preambles40
Trouble Messages41
Audio Walk Test41
Walk Test Trouble Audible41
Single Channel Audio Operations41
Audio Control Led/Switch Module41
ALL SPEAKERS EVAC Switch42
SELECTIVE EVAC Switch42
ALL SPEAKERS TALK Switch42
LOCAL SPEAKER Switch42
Audio Control Led/Switch Module for Single Channel Operations42
Optional Functions43
Speaker Select Switches43
Single Channel Audio System Operation43
How to Operate the Microphone Operation During Automatic Alarm Conditions43
How to Manually Initiate an Evacuation Signal44
Led/Switch Locations for Microphone Operation During Alarm Conditions (Single Channel)44
Led/Switch Locations for Evacuation Signal Initiation (Single Channel)44
How to Operate the Microphone During Non-Alarm Conditions45
How to Use the Local Panel Speaker45
Led/Switch Locations for Microphone Operation During Non-Alarm Conditions (Single Channel)45
Led/Switch Locations for Local Panel Speaker Operation (Single Channel)45
Dual Channel Audio Operations46
Audio Control Led/Switch Module for Dual Channel Audio46
ALL SPEAKERS EVAC Switch46
SELECTIVE EVAC Switch46
Audio Control Led/Switch Module for Dual Channel Operations46
ALL SPEAKERS TALK Switch47
LOCAL SPEAKER ALERT Switch47
LOCAL SPEAKER EVAC Switch47
Optional Functions47
Speaker Select Switches and Leds48
Dual Channel Audio System Operation48
How to Operate the Microphone During Automatic Alarm Conditions48
How to Manually Initiate an Evacuation Signal49
Led/Switch Locations for Microphone Operation During Alarm Conditions (Dual Channel)49
Led/Switch Locations for Evacuation Signal Initiation (Dual Channel)49
How to Operate the Microphone During Non-Alarm Conditions50
Triple Channel Audio Operations50
Audio Control Led/Switch Module for Triple Channel Audio50
Led/Switch Locations for Microphone Operation During Non-Alarm Conditions (Dual Channel)50
Audio Control Led/Switch Module for Triple Channel Operations50
ALL SPEAKERS EVAC Switch51
SELECTIVE EVAC Switch51
ALL SPEAKERS TALK Switch51
LOCAL SPEAKER ALERT Switch51
LOCAL SPEAKER EVAC Switch51
Optional Functions51
Speaker Select Switches and Leds52
Triple Channel Audio System Operation52
How to Operate the Microphone During Automatic Alarm Conditions53
How to Manually Initiate an Evacuation Signal53
Led/Switch Locations for Microphone Operation During Alarm Conditions (Triple Channel)53
Led/Switch Locations for Evacuation Signal Initiation (Triple Channel)53
How to Operate the Microphone During Non-Alarm Conditions54
Led/Switch Locations for Microphone Operation During Non-Alarm Conditions (Triple Channel)54
Telephone Operation55
Phone Led/Switch Module55
How to Operate the Telephone55
Led/Switch Locations for Phone Circuit Operation55
Optional Feature Operation56
How to Initiate a Drill56
How to Perform an All Clear Operation56
Led/Switch Locations for Drill Initiation56
Led/Switch Locations for Performance of an All Clear Operation56
How to Operate Auxiliary Functions57
How to Connect the Phone Line to the Audio System57
Led/Switch Locations for Auxiliary Function Operation57
Led/Switch Locations for Connection of Phone Line to Audio System57
How to Use the Manual Audio Override Switch58
How to Operate the All Speakers Minus Switch58
Led/Switch Locations for Manual Override Switch Operation58
Led/Switch Locations for All Speakers Minus Switch Operation58
Section 8 - Mapnet II  Addressable Interface59
Introduction59
Truealarm System Operation59
Typical Truealarm  Status Report Screen60
Generating Truealarm  Reports61
MAPNET II  Alphanumeric Displays61
MAPNET II  Point Addressing62
Mapnet II62
How to Display a MAPNET62
What to Do if a MAPNET62
Point will Not Reset62
System Point62
Section 9 - Advanced Functions63
Introduction63
Control Keys63
Interface Panel Controls and Indicators63
Function Keys64
How to Set Time and Date64
How to Escape from Menu65
Point Control with the Function Key66
Display/Action Keypad66
FUNCTION Key67
DISPLAY/ACTION Keypad67
MENU Key68
PREVIOUS Key68
NEXT Key68
LAMP TEST Key68
Action Keys69
ENTRY Keypad69
How to Use Prefix Keys to Display System Points69
How to Display the Sensitivity of a Truealarm  Sensor71
Typical Programmer's Report with Point Address Data71
Additional Keys73
Enter73
CLR (Clear)73
NET/-(Network/Hyphen)73
DEL (Delete)73
Viewing Power Supply/Charger Voltage and Current Readings74
Point Selection74
Selecting Points Using Lists74
Selecting Points Using the Keypad74
Selecting Additional Lists75
Operator Access Levels75
Power-Up Sequence76
Section 10 - System Test Procedures77
Lamp Test77
Walk Test77
Walk Test  by Group77
Zone Coding Option78
Silent Walk Test78
Entering Walk Test Mode78
Walk Test  Operation79
Walk Test Features79
Abort Audible and Delay on Reactivation80
Active/Not Active80
Audio Walk Test80
Audio Zone Coding80
Audio Zone/Signal Trouble80
Auto Abort on Alarm80
Auto Abort on Time-Out80
Control List80
Delay before Reset81
Logging Option (Log/No Log)81
Monitor Zone List81
Programmer Configuration81
Sig/No Sig (Silent Walk Test Selection)81
System Trouble81
Trouble Audible82
Zone Code/Zero Code82
Walk Test  Procedures82
How to Enter a Walk Test Passcode82
How to Enter Walk Test Mode83
How to Exit Walk Test  Mode84
How to Turn a Point off84
How to Turn a Point on85
How to Return a Point to AUTO86
How to Enable a Disabled Point87
What to Do in Case of System Malfunction88
Appendix Abbreviated Operator Interface Procedures89
Operator Log In/Log out Procedures89
Access Level Log in Procedure89
Access Level Log in Procedure from the CRT90
Access Level Log out Procedure90
Access Level Log out Procedure from the CRT91
System Operating Procedures91
Viewing a List of Points91
Viewing the Status of any System Point91
Controlling System Points92
Viewing the Sensitivity of a Truealarm  Sensor92
Logging and Clearing an Analog Sensor Peak Value92
Viewing the Historical Alarm and Trouble Logs93
Clearing the Historical Alarm and Trouble Logs93
Viewing Abnormal System Conditions with the Display Time Key94
Clearing the Alarm Verification Tally94
Viewing Power Supply/Charger Voltage and Current Readings94
Generating Truealarm  Reports95

Simplex 4100 - Page 97

Table of Contents

Other manuals for Simplex 4100

Related product manuals