Simplex 4100U Application Guide

3-10
The Fire Alarm Control Panel connects to all of the smoke detectors, manual pull boxes, fire
alarms, etc. within the building. When one of the FACP sensors detects a problem, the FACP
informs the smoke control panel which sensor is in alarm condition and what the alarm condition
is. The smoke control system receives all alarm information from the FACP. However, the smoke
control zones must correspond to the zones of the FACP.
Firefighter Smoke Control Station, Continued
About the Fire Alarm
Control Panel

Simplex 4100U Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Max Signaling Line Circuits (SLC)	2
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	10% to 93% non-condensing
Network Capability	Yes
Communication Protocol	RS-232, RS-485
Battery Backup	24 VDC
NAC Outputs	4
Signaling Line Circuits (SLCs)	2
Power Supply Current	3.0 A
Max Notification Appliance Circuits (NAC)	4
Max Releasing Circuits	4
Max Relay Circuits	4
Communication Ports	RS-232, RS-485