Lost connections are indicated by a panel key. Select this key to reestablish the connection.
When the connection is established the menu changes to include access to FLIR camera
control.
Ú
Note: You can take over camera control from other MFDs connected to the Ethernet
network.
Panning and tilting the FLIR camera
When the connection to the FLIR camera is established, pan and tilt panel buttons appear on
the video panel. The left and right arrow buttons control the camera’s pan. The up and down
arrow buttons tilt the camera.
Select one of the arrow buttons on the panel to control the camera. The camera continues to
move for as long as you press the button.
Zooming the FLIR video image
You zoom the video image by using the zoom panel buttons.
There are two zoom options available, depending upon your selected FLIR camera source
option:
• Digital zoom
Only available when the camera is in Infrared mode. In this mode, the zoom is represented
in levels (0, 2 and 4 times zoom). Each press on a zoom button increments or decrements
the zoom level.
• Optical zoom
Available in daylight mode. In this mode, the camera continues to zoom for as long as you
press a zoom panel button.
The FLIR camera source options
The FLIR camera includes both daylight and infrared video sources.
When the infrared source is selected, the following options are available:
• Toggle color scheme
Cycles through FLIR’s video output color scheme. Each of these schemes maps a different
color to a different temperature.
• Toggle polarity
Inverts the color scheme. For example, instead of: White = Hot and Black = Cold, it
becomes Black = Hot and White = Cold.
The FLIR camera’s home position
You can set the current pan and tilt position as the camera’s home position.
You can later quickly return to this camera position.
116
Video| NSS evo2 Operator Manual
To Next Page
Loading...
Need help?
General
