Client settings
Displays information about the wireless hotspot your unit is connected to or the last one
your unit was connected to. You can select the hotspot in the dialog to set it as a hotspot
you want to always connect to when in range or you can select to delete it.
Advanced
Initiates the Iperf and DHCP Probe tools that help in fault-finding and setting up the wireless
network.
Ú
Note: Iperf and DHCP Probe are tools provided for diagnostic purposes by users familiar
with network terminology and configuration. Navico is not the original developer of
these tools, and does not provide support related to their use.
Wireless connection | NSS evo2 Operator Manual
97
To Next Page
Loading...
