Sipromac 600A - Table of Contents

6
VACUUM PACKAGING MACHINES
OPERATION INSTRUCTIONS
TABLE OF CONTENTS
1. Setting up the machine
2. Electrical connection
3. Operation
3.1 Working principles
3.2 Special packaging
3.2.1 Gas flushing
3.2.2 Top and bottom sealing (bi-active)
3.2.2 3.2.3 Electrical bag cut
3.3 Setting of digital controls
3.4 Daily cleaning
4. Trouble shooting
4.1 Failure during a packaging cycle
4.2 Insufficient vacuum
4.2.1 Leakage in the bag
4.2.2 No leakage in the bag
4.2.3 Insufficient vacuum in the chamber
4.3 Faulty seal
4.3.1 Insufficient seal
4.3.2 No seal
4.3.3 Permanent sealing current
4.3.4 Seal does not stick
4.4 Fault in the valves
4.5 Control board failure
5. Regular maintenance
2010-08-30