Page 2 of 92
Important
• During installation, DO NOT CUT THE TRANSDUCER CABLE. The transducer,
transducer cable and transceiver cabinet are all “balanced parts”. Therefore cutting the
cable may deteriorate performance and will also void the warranty.
• During installation, consideration must be taken, such that the sensor and cable can be
removed for service purposes. Filling pipes or tubes is not recommended unless strictly
necessary.
Weitergabe sowie vervielfältigung dieser unterlage, verwertung
und mitteilung ihres inhaltes nicht gestattet, soweit nicht
ausdrücklich zugestanden. Zuwiderhandlungen verpichten zu
schadenersatz.
Toute communication ou reproduction de ce document,
toute exploitation ou communication de ou son contenu sont
interdites, sauf autorisation expresse. Tout manquement à
cette règle est illicite et expose son auteur au versement de
dommeges et intèrèts.
Copying of this document, and giving it to others and the use
or communication of contents thereof, are forbidden without
express authority. Oenders are liable to the payment of
damages.
Sin nuestra expresa autorización, queda terminantemente
prohibida la reproducción total o parcial de este documento,
asì como su uso indebido y/o su exhibición o comunicación
a terceros. De los infractores Se exigirá el correspondiente
resarcimiento de daños y perjuicios.
Information:
Please visit our web site www.skipper.no for additional information. Here you will nd
product bulletins, software updates, instruction manuals, installation procedures etc.
To Next Page
Loading...
