Page 40 of 92
Chapter: 4. Installation
Fig. 4.3 Function LEDs, on terminal board
Power indication and function LEDs
The following LEDs are located on the terminal board:
• LD400 NMEA signal activity on receive input 1.
• LD401 NMEA signal activity on receive input 2.
• LD700 +5 V#1/VCC (board external and CPU).
• LD701 +12 V#1/VDD (board external).
• LD702 +5 V#2 (board internal).
• LD703 +12 V#2 (board internal).
• LD704 -12 V.
• LD705 -5 V.
Fig. 4.3 indicates position of these LEDs.
To Next Page
Loading...
