Page 23 of 92
Chapter: 2. Operation
The status screen contains information that will facilitate analysis and correction of several problems. All
installation settings are displayed on this screen. See section for trouble-shooting for more information about
typical status screen content.
Screen status, Menu 1, units.
Softkey Name Value/range Default value Description Activate with
hidden button
1 MENU 1 - 8 1 Menu 1 is selected.
2 LANGUAGE English Not active.
3 VESSEL SPD knots, km/h, mi/h, m/
sec
knots Select speed unit.
4 ES RANGE meters, feet, fathoms,
braccias
meters Select depth unit.
5 DISTANCE NM, km, mi NM Select distance unit.
6 SOUND SPD m/sec, ft/sec, knots,
km/h, mi/h
m/sec Select sound speed unit.
Note:See “System Adaption” on page 22 for more information.
System:
Text in red indicates a possible problem with the system, text in orange indicates a potential but non critical
problem. In both cases, run self diagnostics in the diagnostic screen to nd the source of the problem. Note:
More about the status information in section “Typical Status Screen Contents” on page 59.
To Next Page
Loading...
