Page 22 of 92
Chapter: 2. Operation
The following examples show how the system responds to errors in the NMEA input formats. Formats in
yellow are rejected. See “NMEA Setup” on page 48 for more informations about accepted formats.
Input NMEA message Description Format status
$TIHDT,123.40,T*1B Correct, accepted format with checksum. Accepted.
$HEROT,10.40,A*2E Correct, accepted format with checksum. Accepted.
$HEROT,10.40,V*39 Correct, accepted format with checksum but invalid status
symbol.
Rejected.
$HEHDT,123.4,T Correct, accepted format without checksum. Rejected.
$HEHDT,123.4,T*FF Correct, accepted format with wrong checksum. Rejected.
$WIMWD,93.2,T,92.8,M,12.3,N,,*02 Correct, not recognised format. Rejected.
To Next Page
Loading...
