Page 65 of 92
Chapter: 6. Trouble Shooting
Recording of sensor data:
Since the system status denition is based on the statistical experimental results (not direct measurements
of the parameters), the conclusions may be somewhat subjective. Therefore, it is advisable for the service
personnel to use alternative validation methods before replacing the transducer. Such method is “recordings”
in “Screen diagnostics”. This recording will store the received signals to the internal “compact ash memory
card”. At a time of error press “recordings” to on. Make the recording for about 1 - 2 hours. Then set back
to”recordings o”
Open Display unit door. Switch o main power.
Take out Compact Flash (CF) memory card. Insert it into a PC CF card reader.
Goto folder DL_REC
In this folder copy the recorded le with todays date
Send by mail to support@skipper.no together with a photo of “Screen status” and “Screen diagnostics”.
To Next Page
Loading...
