Page 83 of 92
Chapter: 12. Appendix 3. Non wheelmark approved features
Screen Diagnostics, Menu 3.
Softkey Name Range/
value
Default value Description Activate with
hidden button
1 MENU 1 - 3 3 Menu 3 is selected. Note: Use encoder to get
access to menu 3.
2 MEAN
VALUE
WT/BT WT In “Screen diagnostics” the mean values may
be switched to BT values.
3 ES MODE On/o O Turn ES mode on/o. Yes (3 beeps)
4 SL BT MODE On/o On Enabling/Disabling individual BT samples,
which are only executed, when the operating
range is 25 m or lower. Can be used for
trouble shooting and factory testing. Must be
switched on at normal operation.
Active when
AUTO BT is o.
5 AUTO BT On/o On Toggle automatic bottom track. If
switched on, bottom track sampling rate is
automatically reduced if the present water
depth is greater than bottom track operating
range. If AUTO BT is switched o, bottom
track function will operate continuously, but
still only give BT speed indications within the
range for bottom track.
Yes (2 beeps)
6 GPS->BT On/o O This softkey allows the user to substitute
longitudinal BT value with GPS data if
bottom track is lost. The transversal value
will be xed to 0 knots.
Yes (3 beeps)
GPS:BT
This softkey allows the user to substitute longitudinal BT value with GPS data if bottom track is lost. The
transversal value will be xed to 0 knots.
A warning “GPS:BT” will ash when Bottom track is from GPS.
To Next Page
Loading...
