Skipper DL850 - Installation Diagrams

Edition: 2017-09-25
Page 70 of 92
Chapter: 10. Appendix 1
10. Appendix 1
Miscellaneous Installation Diagrams
Following diagrams, drawings and pictures are included:
• Fig. 10.1. Picture of transceiver unit showing PCB positions. See “PCB positions in
Transceiver Unit” on page 71.
• Fig. 10.2. LEDs on PCBs in the transceiver unit. See “LEDs on PCBs in Transceiver Unit” on
page 72.
• Fig. 10.3. System overview. See “DL 850 System Overview” on page 73.
• Fig. 10.4. Interconnection diagram between the operator unit and the transceiver unit. See
“Operator Unit - Transceiver Unit Interconnection” on page 74.
• Fig. 10.5. Interconnection diagram between sensor and the transceiver unit. See “270 kHz
Sensor Cable Connection” on page 75.
• Fig. 10.6. Dimensional drawing of transceiver unit. See “Transceiver Unit Dimensions” on
page 77.
• Fig. 10.7. Dimensional drawing of operator unit. See “Dimensional Drawing Cabinet” on page
78.
• Fig. 10.8. 115/230 V selection on backplane inside Transceiver Unit. See “115/230 V selection
on backplane inside Transceiver Unit” on page 79.
For bottom part installation, there are separate manuals. All manuals (examples below) available on
manufacturers homepage. (See title page for details).
SKIPPER Electronics AS
Operation and Installation DL850 270 kHz