Skipper DL850 - Screen Diagnostics, Menu 1, Details off

Edition: 2017-09-25
Page 30 of 92
Chapter: 2. Operation
Screen diagnostics, Menu 1, Details O.
Soft-
key
Name Range/
value
Default
value
Description Activate
with hidden
button
1 MENU 1 - 3 1
2 DIAGNOSTIC On/o O Start self diagnostics procedure, The results will be shown in
the ‘test results’ frame, and advice based on the results, will be
displayed in ‘possible reasons’. More info in section “Typical
diagnostic screen contents.” on page <?>. Note: Diagnostics
not available in Demo/Simulate mode.
3 DETAILS On/O O Details O: Only diagnostics results shown
Details On: Doppler signal and frequency of each channel
shown for diagnostics use.
4 RECORDINGS On/O O If necessary, the user can log all relevant raw data to the
Compact Flash disk. This data will be stored in an internal
proprietary format that can be analysed upon request.
5
6
SKIPPER Electronics AS
Operation and Installation DL850 270 kHz