Skipper DL850 - Operator Unit External Connections

Edition: 2017-09-25
Page 42 of 92
Chapter: 4. Installation
Operator unit External connections
5 x PG 13.5 cable entry 10-12 mm
Ground Stud
XJ402: NMEA ports D-SUB 9 pin female
XCN6: VGA terminal HDD-SUB 15 pin female
XCN3: Not used D-SUB 25 pin female
If required, the PG glands can be moved to other blinded holes. Extra holes are also available on back side
of cabinet.
SKIPPER Electronics AS
Operation and Installation DL850 270 kHz