Skipper DL850 - Page 41

Edition: 2017-09-25
Page 41 of 92
Chapter: 4. Installation
Important note: If, after power-up, on screen status, you see the following message “Receiver PLD rev:
0.0.00” in the upper right corner, this is an indication of old PLD in the transceiver unit. The unit will work,
but is not optimized. Replace PLD with correct version, (1.0.00) or contact your local supplier for more
information.
Part number: LG-T001
Operation and Installation DL850 270 kHz
SKIPPER Electronics AS