NOTICE
Contamination of the halogen lamp reduces the life
of the lamp!
▶
Do not touch the glass of the light bulb with your
bare ngers.
NOTICE
Danger of headlight damage due to the ingress of
water and dirt!
▶
Always t the protective cap on the headlight cor-
rectly after changing a bulb.
Conditions for changing a bulb
✓ Ignition o
✓ Light switched o
Main beam
›
Remove the protective
cap from the headlight.
›
Press the socket with
the light bulb upwards
and remove it.
›
Change the bulb in the
socket.
›
Insert the base with
the new light bulb into
the headlight so that
the xing lug
A
is
pointing down.
›
Reinstall the protective
cap on the headlight.
Front turn signal
›
Adjust the front wheels so that the cover cap in
the wheel arch is accessible.
Symbols on the cover
cap:
Secure position
Removal/insertion
position
›
Turn the cover cap
with the corresponding
symbol until it is facing
the marking on the
wheel arch.
›
Remove the cover cap.
›
Turn and remove the
socket with the bulb.
›
Change the bulb in the
socket.
›
Insert the socket with
the light bulb into the
headlight and turn it
clockwise
to secure.
›
Insert the cover cap in-
to the wheel arch and
turn it clockwise
to
secure.
Fog lights
›
Remove the cover with
the bracket from the
tool kit and remove it
towards the outside of
the bumper.
›
Unscrew screws A.
›
Remove the light
downwards and for-
wards.
47
Lighting, windscreen wipers and washers › Replace light bulbs
To Next Page
Loading...
Need help?
General
