127
SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS
230790ABA
General Section 5 – Procedures
Section 5 – Procedures
5.1 General
The following information is provided to assist you in
the use and application of servicing and maintenance
procedures contained in this chapter.
5.1-1 Safety and Workmanship
Your safety, and that of others, is the first
consideration when engaging in the maintenance of
equipment. Always be conscious of weight. Never
attempt to move heavy parts without the aid of a
mechanical device. Do not allow heavy objects to rest
in an unstable position. When raising a portion of the
equipment, ensure that adequate support is provided.
5.1-2 Engine and Transmission
The engine used on the SJ1044 TH/THS & SJ1056
TH/THS telehandler models is a Deutz TCD 3.6L Tier
4 Final.
Engine service information can be found in the
Deutz Engine Manuals. It should be noted that
engine warranty service work is to be directed to and
administered by your nearest authorized Deutz dealer/
distributor.
Skyjack cannot enter into any warranty service work
requirements.
The basic Deutz engine warranty covers the entire
engine from the fan to the fly wheel including all
internal parts as well as the following list of parts
supplied with the engine as original:
▪
Electronic Data Display Module
▪
Starter
▪
Alternator
▪
Injectors
▪
Fuel Pump
▪
Fuel Solenoid
▪
Water Pump
The air cleaner and exhaust system, cooling system
including radiator and hoses are not part of the engine
package, and are covered later in this manual.
To Next Page
Loading...
