23
Scheduled Maintenance Inspections Section 1 – Scheduled Maintenance
7
Emergency Power Unit (B)
▪
Make sure there are no loose or missing parts.
▪
Make sure there are no loose wires or missing
fasteners.
▪
Make sure there is no visible damage.
▪
Make sure all the fittings and hoses are
correctly tightened and there are no hydraulic
leaks.
8
Fuel Tank and Lines (B)
IMPORTANT
Before you use the MEWP, make sure there is
sufficient fuel for the estimated task.
DANGER
Explosion or fire hazard. Do not smoke near the
fuel system. If you do not obey, there is a risk of
death or serious injury.
▪
Make sure that the fuel filler cap closes tightly.
▪
Make sure there is no visible damage to the
tank, gauge, hoses, or fittings.
▪
Make sure there is no indication of fuel
leakage from the tank, gauge, hoses, fittings,
pump, and filter.
WARNING
Environmental hazard. Immediately remove
gasoline, diesel fuel, engine oil, and hydraulic
fluid spills and leaks with rags. Discard these
rags in accordance with national, state/provincial/
territorial, and local regulations. Spilled fluids can
damage the environment. When spilled fluids go
into the water (for example, a sewage system,
streams, rivers, or other surface water), they can
kill aquatic life.
7
8
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
