SMA SUNNY ISLAND 6.0H - Page 116

13 Directory of the Parameters in Installer Mode and Expert Mode SMA Solar Technology AG
116 SI60H-80H-BE-en-20 Operating Manual
313# Slave1
312.10 OpStt Operating state of the Sunny Island Operating (1) Operation
Warning (2) Warning
Failure (3) Failure
312.11 CardStt SD memory card status message Off (1) No SD memory card inserted
Operational (2) Ready for operation
Mount (3) Initialization
OutOfSpace (4) No storage space available
BadFileSys (5) No file system detected
Incomp (6) File system incompatible
Parameter (7) Parameter set write access
ParamFailed (8) Parameter set write access
failed
WriteLogData (9) Log data write access
312.12 FwVer2 Firmware version of the digital signal
processor
‒‒
312.13 FwVer3 Boot loader of the operation control
unit
‒‒
312.14 FwVer4 Boot loader of the digital signal
processor
‒‒
312.18 ComMod1 Type of interface in the interface slot
SISysCan
‒‒‒ No interface inserted
SI-SysCan SI-SYSCAN.BGx inserted
(multicluster system)
312.19 ComMod2 Type of interface in the interface slot
SiComSma
‒‒‒ No interface inserted
SI-ComSma SI-COMSMA.BGx inserted
(RS485)
SI-SW-DM SWDMSI-NR inserted
(Speedwire)
No. Name Description Value Explanation
313.01 FwVerSlv1 Firmware version of slave 1 ‒ ‒
313.02 SNSlv1 Serial number of slave 1 ‒ ‒
313.03 OnTmhSlv1 Operating hours of slave 1 in hours ‒ ‒
313.04 PhSlv1 Line conductor assignment of slave 1 L1 Line conductor
L1
L2 Line conductor
L2
L3 Line conductor
L3
No. Name Description Value (plain text
no.)
Explanation