SMA SUNNY ISLAND 6.0H - System (250#)

13 Directory of the Parameters in Installer Mode and Expert Mode SMA Solar Technology AG
112 SI60H-80H-BE-en-20 Operating Manual
244# Slave1
245# Slave2
13.2.5 System (250#)
No. Name Description Value Explanation Default
value
244.01 Rly1OpSlv1 Multifunction relay 1
of slave 1 function
See 241.01 Rly1Op, page 108 for value and
explanation
Off
244.02 Rly2OpSlv1 Multifunction relay 1
of slave 1 function
See 241.01 Rly1Op, page 108 for value and
explanation
Off
No. Name Description Value Explanation Default
value
245.01 Rly1OpSlv2 Multifunction relay 1
of slave 2 function
See 241.01 Rly1Op, page 108 for value and
explanation
Off
245.02 Rly2OpSlv2 Multifunction relay 2
of slave 2 function
See 241.01 Rly1Op, page 108 for value and
explanation
Off
No. Name Description Value Explanation Default
value
250.01 AutoStr Number of autostarts 0 to 10 0 indicates that autostart is
disabled.
3
250.02 Dt Date in dd.mm.yyyy ‒ ‒ ‒
250.03 Tm Time in hh:mm:ss ‒ ‒ ‒
250.04 BeepEna Button sound Off Disable On
On Enable
250.06 ComBaud Baud rate in Bd
This value cannot be used
with Speedwire.
1,200 Default value for RS485
communication.
‒
4,800 ‒
9,600 ‒
19,200 ‒
115 k Default value for Speedwire
communication.
250.09 ComAdr Communication address
(non-adjustable)
0 to 65 535 ‒ 1
250.11 AfraEna Automatic frequency
synchronization (AFRA)
(expert mode)
Disable Disable ‒
Enable Enable
250.23 Box Type of Multicluster Box
used
None None ‒
MC-Box-6 Multicluster Box 6.3
MC-Box-9 Multicluster Box 9.3
MC-Box-12 Multicluster Box 12.3
MC-Box-36 Multicluster Box 36.3