SMA SUNNY ISLAND 6.0H - Stopping Generator without Autostart

7 Manually Controlling the Generator SMA Solar Technology AG
38 SI60H-80H-BE-en-20 Operating Manual
7.4 Stopping the Generator without Autostart Function
1. Stop the generator on the Sunny Remote Control (see Section7.2, page37). By doing so the Sunny Island
disconnects the stand-alone grid from the generator.
2. Open the load-break switch between the generator and Sunny Island.
3. Stop the generator (see manufacturer's manual).
☑ The generator is stopped. After the power-down time and the minimum stop time, you can use the generator again.