SMA SUNNY ISLAND 6.0H - Information Page for Self-Consumption;Backup

SMA Solar Technology AG 5 Operating the Sunny Island via Sunny Remote Control
Operating Manual SI60H-80H-BE-en-20 21
5.2 Standard Mode
5.2.1 Display of Operating States
The Sunny Remote Control displays the following operating states until the Sunny Island is started.
Figure4: Display of operating states (example Standby)
5.2.2 Information Page in Systems for Increased Self-Consumption and Battery
Backup Systems
When the Sunny Island is started, the Sunny Remote Control provides information on the status of the system for increased
self-consumption.
Figure5: Energy flows and status messages of the Sunny Island
Position Designation Explanation
A Boot The Sunny Island is initializing.
Error The Sunny Island is in error mode.
LBM 1 The Sunny Island is in battery protection mode 1.
LBM 2 The Sunny Island is in battery protection mode 2.
LBM 3 The Sunny Island is in battery protection mode 3.
Restart The Sunny Island is performing a restart.
Shutdown The Sunny Island is stopped.
Silent The Sunny Island is in silent mode.
Standby The Sunny Island is in standby mode or in time-controlled operation.
Startup The Sunny Island is starting up.
Position Symbol Designation Explanation
A Warning symbol Symbol for warnings and errors that do not affect the Sunny Island
operation.
If this symbol is flashing, acknowledge the error or warning (see
Section9.2, page41).