SMA SUNNY ISLAND 6.0H - 13 Directory of the Parameters in Installer Mode and Expert Mode; Display Values; Inverter (110#)

SMA Solar Technology AG 13 Directory of the Parameters in Installer Mode and Expert Mode
Operating Manual SI60H-80H-BE-en-20 87
13 Directory of the Parameters in Installer Mode and Expert Mode
13.1 Display Values
13.1.1 Inverter (110#)
111# Total
112# Device
No. Name Description
111.01 TotInvPwrAt Total active power of the Sunny Island inverters in a cluster in kW
111.02 TotInvCur Total current of the Sunny Island inverters in a cluster in A
111.03 TotInvPwrRt Total reactive power of the Sunny Island inverters in a cluster in kvar (expert mode)
111.05 TotLodPwr Total current active power of the loads in a cluster in kW
111.06 TotMccLodPwr Total current active power of the loads in a multicluster system in kW
No. Name Description Value (plain text
no.)
Explanation
112.01 InvOpStt Operating state of the Sunny Island Init (1) Initialization
Startup (2) Switch from standby
to operation
Standby (3) Standby
Run (4) Operation
I-Loop (5) Current-controlled
generator operation
Error (6) Error status
112.02 InvPwrAt Active power of the Sunny Island in kW ‒ ‒
112.03 InvVtg Voltage of the Sunny Island in V ‒ ‒
112.04 InvCur Current of the Sunny Island in A ‒ ‒
112.05 InvFrq Voltage frequency of the Sunny Island in Hz ‒ ‒
112.06 InvPwrRt Reactive power of the Sunny Island in kvar (expert
mode)
‒‒
112.07 Rly1Stt Status of multifunction relay 1 Off Multifunction relay is
deactivated.
On Multifunction relay is
activated.
112.08 Rly2Stt State of multifunction relay 2 Off Multifunction relay is
deactivated.
On Multifunction relay is
activated.