SMA SUNNY ISLAND 6.0H - Decommissioning; Disassembling the Sunny Island

SMA Solar Technology AG 11 Decommissioning
Operating Manual SI60H-80H-BE-en-20 79
11 Decommissioning
11.1 Disassembling the Sunny Island
2. Remove all cables from the Sunny Island.
3. Close the Sunny Island.
4. Remove the ventilation grids laterally.
5. If the Sunny Island is protected against theft, loosen the safety
screws.
6. Loosen the screws on both sides between the Sunny Island and the
wall mounting bracket using an Allen key (AF 5).
1.
:$51,1*
Danger to life from electric shock due to live voltage
High voltages are present inside the Sunny Island. When the enclosure lid is removed, live components can be
touched which can result in death or serious injury due to electric shock.
• Disconnect the Sunny Island from voltage sources (see Section8, page39).