EasyManua.ls Logo

SMA SUNNY ISLAND 6.0H - Replacing the Battery; Safety Warnings and Procedures

SMA SUNNY ISLAND 6.0H
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SMA Solar Technology AG 10 Cleaning and Maintenance
Operating Manual SI60H-80H-BE-en-20 77
10.8 Replacing the Battery
:$51,1*
Risk of injury due to short-circuit currents
Short-circuit currents in the battery can cause heat build-up and electric arcs. Burns and eye injury due to flashes may
result.
Remove watches, rings and other metal objects.
Use insulated tools.
Do not place tools or metal parts on the battery.
:$51,1*
Danger to life due to incompatible lithium ion-battery
An incompatible lithium-ion battery can lead to a fire or an explosion. With incompatible lithium-ion batteries, it is not
ensured that the battery management will protect the battery.
Ensure that the battery is from one of the following manufacturers and has been approved for Sunny Island by the
manufacturer:
–Akasol
Dispatch Energy
–LG Chem
–Leclanché
–SAFT
–Samsung
–Sony
This list is updated regularly (see Planning Guidelines "SMA Smart Home" at www.SMA-Solar.com).
:$51,1*
Chemical burns and poisoning caused by battery electrolytes
If handled inappropriately, battery electrolytes can cause chemical burns to eyes, respiratory system and skin, and be
poisonous. This may result in blindness and serious chemical burns.
Protect the battery enclosure against destruction.
Do not open or deform the battery.
Whenever working on the battery, wear suitable personal protective equipment such as rubber gloves, apron,
rubber boots and goggles.
Rinse acid splashes thoroughly with clear water for a long time and consult a doctor.
Install, operate, maintain and dispose of the battery according to the manufacturer's specifications.
/05*$&
Damage to the battery due to incorrect settings
The battery parameters influence the charging behavior of the Sunny Island. The battery will be damaged by incorrect
settings of the parameters for battery type, nominal voltage and capacity.
Ensure that the values recommended by the battery manufacturer are set for the battery (refer to the technical data
of the battery in the manufacturer documentation).

Table of Contents

Other manuals for SMA SUNNY ISLAND 6.0H

Related product manuals