SMA SUNNY ISLAND 6.0H - Page 76

10 Cleaning and Maintenance SMA Solar Technology AG
76 SI60H-80H-BE-en-20 Operating Manual
• Push the front locking tabs of the fan backwards and the rear
locking tabs of the fan forwards.
• Slowly remove the fan from the Sunny Island.
• Release and remove the fan plug.
6. Insert the fan plug into the pin connector until it snaps into place.
7. Insert the fan into the Sunny Island until the fan audibly snaps into place.
8. Press the fan guard into the bracket until it audibly snaps into place.
5.
/05*$&
Damage to the fan due to compressed air
• Clean the fan with a soft brush, a paint brush, or a damp cloth.