5 Operating the Sunny Island via Sunny Remote Control SMA Solar Technology AG
22 SI60H-80H-BE-en-20 Operating Manual
5.2.3 Information Page in Off-Grid Systems
Figure6: Energy flows and status messages of the Sunny Island (example).
B Device assignment The Sunny Island connected to the Sunny Remote Control is the master.
The Sunny Island connected to the Sunny Remote Control is slave 1.
The Sunny Island connected to the Sunny Remote Control is slave 2.
C SD memory card The SD memory card is inserted.
Symbol
flashing
The Sunny Island is accessing the SD memory card.
No
symbol
The SD memory card is not inserted.
DMultifunction relay 1Multifunction relay 1 is deactivated.
Multifunction relay 1 is activated.
EMultifunction relay 2Multifunction relay 2 is deactivated.
Multifunction relay 2 is activated.
F Battery power and
state of charge
The battery is being charged.
The battery is discharging.
Battery power in kW, state of charge (SOC) in %
G hh:mm:ss Time System time
H Power and status of
the utility grid
Power in kW
The utility grid voltage and frequency are within the configured limits.
The maximum reverse power in the utility grid has been exceeded.
Position Designation
A Graphical representation of the energy flows
B Status of the stand-alone grid
C Status of the Sunny Island
D State of charge of the battery
E Status of the generator
Position Symbol Designation Explanation
To Next Page
Loading...
