SMA Solar Technology AG 5 Operating the Sunny Island via Sunny Remote Control
Operating Manual SI60H-80H-BE-en-20 29
5.4.3 Menus in Installer and Expert Mode
Figure13: Layout of the menu page in installer mode (example)
5.4.4 Parameter Page in Installer and Expert Mode
Figure14: Layout of the parameter page in installer mode (example)
5.4.5 Selecting Menus and Parameters
1. Switch to installer mode on the Sunny Remote Control (see Section5.4.1, page28).
2. Turn the button to the right until the return symbol appears to the right of the desired menu. The Sunny Remote Control
scrolls through the menu items on the display line by line.
3. Press the button. This accesses the sub-menu level.
☑ The Sunny Remote Control displays the sub-menu level. The selected menu level is shown in the first line.
4. Repeat steps 2 and 3 until the Sunny Remote Control displays the first parameter page.
5. Turn the button to the right until the Sunny Remote Control displays the desired parameter.
6. Set the parameter (see Section5.4.6, page30).
Position Designation Explanation
A Menu path The two previously selected menu levels
If you are in the top menu level, the display will show Installer in installer mode
and Expert in expert mode.
B Return symbol Return symbol for selecting a menu
CMenu ‒
Position Designation Explanation
A Menu number and parameter number ‒
B Menu path The two previously selected menu levels
C Return symbol Return symbol for setting the parameter
If no return symbol is displayed, the parameter cannot be set.
D Name of the parameter ‒
E Value and unit of the parameter ‒
To Next Page
Loading...
