SMA Solar Technology AG 13 Directory of the Parameters in Installer Mode and Expert Mode
Operating Manual SI60H-80H-BE-en-20 117
314# Slave2
13.3.2 Battery (320#)
313.05 OpSttSlv1 Operating state of slave 1 Operating Operation
Warning Warning
Failure Failure
313.06 FwVer2Slv1 DSP firmware version of slave 1 ‒ ‒
313.07 FwVer3Slv1 OCU boot loader of slave 1 ‒ ‒
313.08 FwVer4Slv1 DSP boot loader of slave 1 ‒ ‒
No. Name Description Value Explanation
314.01 FwVerSlv2 Firmware version of slave 2 ‒ ‒
314.02 SNSlv2 Serial number of slave 2 ‒ ‒
314.03 OnTmhSlv2 Operating hours of slave 2 in hours ‒ ‒
314.04 PhSlv2 Line conductor assignment of slave 2 L1 Line conductor
L1
L2 Line conductor
L2
L3 Line conductor
L3
314.05 OpSttSlv2 Operating state of slave 2 Operating Operation
Warning Warning
Failure Failure
314.06 FwVer2Slv2 Firmware version of the digital signal processor of slave 2 ‒ ‒
314.07 FwVer3Slv2 Boot loader of the operation control unit of slave 2 ‒ ‒
314.08 FwVer4Slv2 Boot loader of the digital signal processor of slave 2 ‒ ‒
No. Name Description
320.01 Soh State of charge (SOH) in %
Ratio of currently usable capacity to the rated value of the battery
320.02 StatTm Run time of statistics counter in days
320.03 ChrgFact Charge factor
320.04 BatEgyCntIn Energy meter for battery charging in kWh
320.05 BatEgyCntOut Energy meter for battery discharging in kWh
320.06 AhCntIn Battery charging counter in Ah
320.07 AhCntOut Battery discharging counter in Ah
320.08 BatTmpPkMin Minimum battery temperature in °C
320.09 BatTmpPkMax Maximum battery temperature in °C
320.10 EquChrgCnt Equalization charge meter
No. Name Description Value Explanation
To Next Page
Loading...
