SMA Solar Technology AG 5 Operating the Sunny Island via Sunny Remote Control
Operating Manual SI60H-80H-BE-en-20 27
6. Press the button. The Sunny Remote Control will display the setting pages belonging to the display page.
7. To select the desired parameter, turn the button to the right until the return symbol appears to the right of the desired
parameter.
☑You have selected the parameter.
8. To set the parameter, press the button and then turn it to the left or right.
9. Once you have set the required parameter, press the button. This saves the setting.
10. To exit the setting page, switch to the display page or the standard mode:
• Turn the button to the left until the return symbol appears in the first line.
• To return to the display page, turn the button to the left until <back> appears.
• To switch to standard mode, turn the button to the left until <home> appears.
• Press the button.
Tip: <back> and <home> also appear at the end of the list if the button is turned to the right.
Example: Selecting the display page.
You want to restart the Sunny Island. This setting is in the Inverter category.
• Select display page Inverter (1/1).
Example: Selecting the setting page
You have selected the display page Inverter (1/1).
• Press the button.
☑ The setting page Inverter (1/2) appears.
Example: The Sunny Island is to start in time-controlled operation weekly. For this, the repetition type
(Repetition) must be set to "Weekly".
•Access the Inverter (1/2) setting page.
☑The Inverter (1/2) setting page appears.
• Turn the button until the return symbol appears next to
the parameter Repetition. The Sunny Remote Control then switches from the setting page Inverter (1/2) to
setting page Inverter (2/2).
• Press the button.
• Turn the button to the right until Weekly appears.
• Press the button. This saves the parameter.
☑ You have set the repetition type to Weekly in
time-controlled operation.
To Next Page
Loading...
