Smart Electronic CX01 - Risks in Case of Intended Use; Location

General Safety Instructions
smart CX01 15
3.2 Risks in Case of Intended Use
CAUTION!
Humidity, wrong mains voltage and/or wrong
mains frequency, lightning stroke or mechanical
overload may cause malfunction of or damage to
the device.
 Ensure that the receiver (in particular the mains plug) and
the remote control are not exposed to any humidity. Exam-
ple: Do not place filled flower vases or similar onto the re-
ceiver.
 Only connect the receiver to 175…250 V ~, 50/60 Hz.
 Disconnect mains plug in case of thunderstorms or malfunc-
tion.
 Do not place heavy items onto the receiver.
 Do not bend or squeeze the cable.
WARNING!
Risk of electric shock when contacting mains volt-
age.
Damage to housing, mains cable or improper repair may re-
sult in contact to mains voltage.
 Do not place heavy items onto the receiver.
 Do not bend or squeeze the cable.
 Repairs of plug, cable or receiver should only be performed
by qualified specialists.
3.3 Location
 Place the receiver onto a solid and level surface.
 Protect the receiver from humidity, heat, dust and dirt.
 Do not place items filled with liquid, e.g. flower vases, onto the receiver.
 Protect the receiver from dripping and splash water.
 Do not place burning items, e.g. burning candles, onto the receiver.