Smart Electronic CX01 - Basic Operation; Initial Start-Up; Switch on Receiver; Language Selection

Basic Operation
22 smart CX01
5 Basic Operation
This chapter describes the required steps to be able to use the offer of radio and
TV channels provided via satellite.
5.1 Initial Start-Up
After first switching-on or after resetting the receivers, various windows will
open:
5.1.1 Switch on Receiver
1. Switch on all connected devices.
2. Ensure that the correct AV input is selected at the TV set (i.e. that the signals
from the receiver are displayed).
3. Ensure that the correct audio input is selected at the connected home cine-
ma or hi-fi system.
4. Switch on the receiver by using the power switch (on the rear panel of hous-
ing) (I, ON).
5.1.2 Language
By default, the smart CX01 language is
preset to Deutsch [German].
Please ensure that the setting is cor-
rect; you may change your settings by
correspondingly pressing the keys
PR+ and PR-.
 Confirm by pressing OK to go to the next window.

The submenu Language
can be accessed anytime via the
menu Language.