Predefined, both the menu and the program lock are off.
The default password is 0000.
1. Press OK to save your changes and to leave the sub-menu.
2. Leave the menu by pressing EXIT until the screen shows the TV picture.
Instead of completely leaving the menu, you can also fur-
ther stay in the menu - or in the sub-menu - to perform fur-
ther settings.
5.6 Set Time
Reasonable operation of the smart CX01 require setting of system time. By de-
fault, the receiver is set to GMT
7F
8
Usage, i.e. date and time are taken from the
received signal. Time zone is set to GMT + 1 hour (+ 1:00) by default. Required
changes can be made in the sub-menu Time:
1. Select the menu System Setup.
2. Select the sub-menu Time and confirm by pressing OK.
3. Select the item GMT Usage and switch on or off GMT Usage by using the
keys or .
On = automatic time setting via satellite signal is activated.
Off = automatic time setting via satellite signal is deactivated.
4. Select the item GMT and select your time zone by using the keys or
; for example, the time zone of Germany, Austria and Switzerland is
GMT +1:00.
5. Select the item Summer Time and switch Summer Time Off or On by using
the keys or .
8
GMT = Greenwich Mean Time
To Next Page
Loading...
