46 smart CX01
6.2 Images
The basic steps with image files only slightly differ from the steps with music
files (automatic playback of a number of images). The differences are included
in the functions available by pressing the keys 2 and 3.
6.2.1 Configure a Slide Show
Press the key 2 to configure a slide show
1. Select Slide Show Time by using the keys PR+ and PR-.
2. Using the keys and , select the time period between display-
ing of two subsequent images (1 to 9 seconds).
When selecting Off, the first selected image will be continuously dis-
played on the screen.
3. Select Slide Show Repeat by using the keys PR+ and PR- to determine
by using the keys and if the slide show should start again
from the beginning after displaying the last image.
4. Select the line Save – Cancel by using the keys PR+ and PR-, and then
use the keys and to determine if the settings should be saved
or discarded, and confirm by pressing OK.
You will be directed back to the image list.
6.2.2 Showing all Images in the Current Directory
Press key 3 to display all images in the current directory.
You can also have images being displayed whilst music is
being played, e.g. by changing the file type during playback
of music (using key 0) and then starting a slide show.
6.3 Video
6.3.1 Playback Video
1. Select the file to be played using the keys PR+ und PR-. In left half of the
screen you see a thumbnail and you can watch the video in preview mode.
Use the keys , , and to control playback.
2. Press OK to start playback in full screen mode.
3. Use the keys , , , , , and to control playback.
To Next Page
Loading...