Smart Electronic CX01 - Antenna Setup; Fixed Antenna Configuration

Extended Settings and Functions
50 smart CX01
7.1.3 Antenna Setup
The submenu Antenna Setup states several entries depending on your selec-
tion of
Fixed Antenna or Motor Antenna
at Antenna Connection.
7.1.3.1 Fixed Antenna
 At Satellite, select the satellite to which the following settings should apply.

The options are limited to such satellites that are marked in
the Satellite List as such satellites from which you want to
receive channels.
 At LNB Freq, select the value corresponding to the used LNB. Alternatively,
press OK, select the corresponding value from the list, and confirm by press-
ing OK.
Possible values LNB frequency (MHz)
5150
10600
Universal (9750 - 10550)
5750
10700
Universal (9750 - 10600)
5950
10750
Universal (9750 - 10700)
9750
11250
Universal (9750 - 10750)
10000
11300
Universal (9750 - 10600)
10050
5150 - 5750
Unicable (9750 - 10600)
10450
5750 - 5150
Unicable (10200)
A universal LNB with 9750 - 10600 MHz is the default value.
You can set signal strength and signal quality for receiving of a certain tran-
sponder: