Smart Electronic CX01 - Direct Channel Selection

Basic Operation
smart CX01 31
5.7.1 Direct Channel Selection
 Select the desired channel by using the keys PR+ and PR-.
With each change of channel, an information window with information on the
current channel will be displayed:
No.
Description
1
Channel number of current channel in current channel list
2
Channel name of current channel
3
Date
4
Time
5
Name of next program
6
Name of current program

 Press the INFO key to call this window at any time.
 Set display time at OSD Timeout (see section 7.9, page 62).
 Press EXIT two times to close the information window.