Smart Electronic CX01 - Digital Audio Output Format; SmartLink (CEC) Function; Timer Programming

Extended Settings and Functions
60 smart CX01
7.6 Format of the Audio Signal at the Digital Audio Out
1. Select the submenu TV System in the menu System Setup and confirm
with OK.
2. Select Digital Audio Out to set the format of the digital audio signal by
using the keys and :
PCM – Pulse Code Modulation (default),
DD – Dolby Digital (multi-channel audio).

For programs broadcasted in DD format, select DD if you
have a connected DD-compatible multi-channel amplifier or
a DD-compatible home cinema system, or if your TV set is
capable of processing DD signals.
7.7 SmartLink (CEC)
If you have a CEC15F
16
-compatible TV set, and receiver and TV set are connected via
HDMI you can switch on and off (standby mode) both sets with the remote
control of your smart CX01:
1. Select in the menu System the submenu TV System and press OK.
2. Select SmartLink and use the keys und to switch the SmartLink
function on and off.
7.8 Timer
In the submenu Timer Setting of the menu System Setup you can program,
edit and delete up to eight different events (channel switch).
1. Mark a timer by using the keys PR+ and PR-.
2. Press the OK key to open the timer.
3. Mark the line Timer Mode by using the keys PR+ and PR-.
16
CEC = Consumer Electronics Control = HDMI feature for entertainment units, provides via HDMI
various control functions, e. g. "one touch recording" or "system standby". The TV set is the control
center and the TV remote control becomes the remote control of the whole system.