Extended Settings and Functions
smart CX01 61
4. You can select from the following possibilities by using the keys and
:
Value Meaning
The timer is deactivated.
Single event (only once).
Event occurs every day at the same time (e.g. the news program
Event always at the same weekday
Event occurs every month at the same day (e.g. every 20th)
Event Monday to Friday at the same time .
5. In line Timer Service the option Channel is selected. There is not any possi-
bility to change this.
6. Mark the line Wakeup Channel by using the keys PR+ and / PR-, and
select the channel to be displayed by using the keys and .
7. Mark the line Wakeup Date by using the keys PR+ and PR-, and enter the
date by using the numeric keys.
8. Mark the line On Time by using the keys PR+ and PR-, and enter the on time
by using the numeric keys.
9. Mark the line Duration by using the keys PR+ and PR-, and enter duration of
the program by using the numeric keys.
You can go from letter to letter (position to position) in the
date and time fields by pressing the keys and .
10. Mark the button Save by using the keys PR+ and PR-, and confirm by press-
ing OK (or select Cancel and confirm by pressing OK if you want to cancel
programming – then you will return to the sub-menu Timer Setting).
You can directly add programs marked in EPG to the
timers. This significantly facilitates programming as you do
not have to make settings for channel, date and time.
To Next Page
Loading...
