Smart Electronic CX01 - Single EPG

Basic Operation
smart CX01 37
5.7.5.1 Single EPG
 Press the SEPP key of the remote
control.
The window Single EPG
(information on one channel)
will open.
No.
Description
1
All programs during a day, with start and end time; the selected program is col-
or-marked.
2
Date of day to which display applies.
3
Duration of current program (start time ~ end time).
4
Name of current program.
5
Illustration of the colored function keys and their functions.
6
Detailed information on the current program.
 Press the keys PR+ and PR- to display a later or earlier program (1).
 Press the keys and to page forward/back respectively one day
(2).
 Press the green function key to scroll down in the information section (6).
 Press the red function key to scroll up in the function area (6).
 Press the yellow function key to include channel, date, switch-on time and
duration of the marked program into a timer. The Timer Mode is set to Once
by default; Timer Service is set to Channel. You may change settings as
described in section 7.4, page 59.
 Press the blue function key to go to the window EPG.
 Press the EXIT key to close the window Single EPG and return to TV opera-
tion.