Smart Electronic CX01 - Audio Settings

Basic Operation
smart CX01 39
 Press the red function key to
access the window Time:
 Here, select the function on the
bottom by using the keys
and :
 Press OK when is selected to go to the current program. The cur-
rent program is marked with .
 Press
OK when is selected to go one program forward or
back.
 Press
OK when is selected to go two hours forward or back.
 Press
OK when is selected to go one day forward or back.
 Press
OK when is selected or press EXIT to close the window
Time and to return to the EPG window.
 Press the green function key to include channel, date, switch-on time and
duration of the marked program into a timer. The Timer Mode is set to Once
by default; Timer Service is set to Channel. You may change settings as
described in section 7.4, page 59.
 Press the blue function key to leave the EPG window and return to the
window Single EPG.
 Press the EXIT key to leave the EPG window and return to the TV program.
5.7.6 Audio Settings
1. Press the key AUDIO.
2. Select the audio mode by using the keys and .
Depending on the selected channel and the current program, the following
modes are available: Left - Right - Stereo - Mono.
3. Press the keys PR+ or PR- to select another language or Dolby AC3 (Dolby
Digital) as far as provided by the TV station.
4. After selecting the desired audio mode, leave the menu by pressing the EXIT
key.