48 smart CX01
7 Extended Settings and Functions
7.1 Installation
The settings made by smart apply to a standard satellite system. Any further
system functions (e.g. unicable system or motor antenna) should be manually
set in the menu Installation:
CAUTION!
In case of doubt, have those settings being made by an ex-
pert. Usually, there are no required settings within scope of
normal use of the system.
7.1.1 Antenna Connection
1. In the menu Installation, select the submenu Antenna Connection and
confirm by pressing OK.
2. Select by using the keys and if a Fixed Antenna or a Motor Anten-
na is connected to the receiver.
3. Press EXIT to leave the submenu Antenna Connection.
4. Press EXIT again to leave the menu Installation and to return to TV opera-
tion, or go to another submenu.
If you selected a Motor Antenna, then such antenna should
be further configured at the menu item Antenna Setup.
7.1.2 Satellite List
The submenu Satellite List states a preset list of possible satellites. Depending
on your antenna system you can select the satellites used for receiving chan-
nels:
1. In the menu Installation, select the submenu Satellite List and confirm by
pressing OK
2. Select the satellite you want to receive by pressing the keys PR+ and PR-,
and confirm by pressing OK.
The selected satellite will be correspondingly marked ( ).
To Next Page
Loading...