Smart Optics Activity 850 - 5 Technical Specifications

Technical specifications
6
5. Technical specifications
Dimensions
440 mm x 480 mm x 430 mm (WxHxD)
Weight
23 kg
Connection voltage
100-240 V AC, 50-60 Hz
Power consumption
60 W
Protection class
IP11
Permissible temperature
range
18-30 °C
Measureable objects
Plaster models of teeth
Minimum clamping range
of the removable object
holder
40 mm
Maximum clamping range
of the removable object
holder
70 mm
Height adjustment
+/- 20 mm
Measuring time for the
measurement of
Single stump: < 1 min
3-member bridge: < 3 min
Complete jaw: < 5 min
Resolution
Basic resolution of the 3D sensing head:
50 µm x 66 µm x 50 µm (x, y, z)
Accuracy
+/-10 µm standard deviation measured at test specimen,
determined via min. 50 measuring points with 10 repetitions
each
Output data format
STL
Interfaces
USB
Scope of delivery
Scanner, power cord, 2x USB cable, CD with operating
software and calibration data, operating manual, calibration
block
System requirements
Operating system Windows 7 Ultimate 64® Bit, Intel core 2
Quad CPU Q 9550 2.83 Ghz or higher, RAM 8 GB, high-
performance 3D graphics card with min. 1GB RAM e.g.
GeForce, 320 GB hard disk