C H A P T E R 3
Using your interactive projector
29 smarttech.com/kb/170295
Setting Use Notes
Projector Information menu
Lamp Hours Displays the current number of
lamp usage hours from 0 to 5000
hours from when it was last reset.
Always reset the lamp hours
after you replace a lamp,
because lamp service reminders
are based on the current hours of
use. See Resetting the lamp
hours on page 53 for details on
how to reset the lamp hours.
Input Displays the current video input
source (VGA-1, HDMI or VIDEO.
Resolution Displays the projector’s most
recently detected video source
signal resolution and refresh rate.
If there is no current video input
source signal, this setting
displays the last known source
signal resolution and refresh rate.
Firmware Version Displays the projector’s digital
display processor (DDP) firmware
version in x.x.x.x format.
Network Version Displays the projector’s network
communications processor
firmware version in x.x.x.x format.
Touch Version Displays the projector’s touch
processor firmware version in
x.x.x.x. format.
Model Number Displays the projector’s model
number.
Serial Number Displays the projector’s serial
number.
To Next Page
Loading...
