C H A P T E R 6
Maintaining your interactive projector
54 smarttech.com/kb/170295
2. Scroll down to Lamp Hour Reset, and then press OK.
Both Lamp Hour values (Standard and Economy) reset to zero.
C A U T I O N
Do not reset the lamp hours unless you have just replaced the lamp module. Resetting the
lamp hours on an old lamp can damage your projector as a result of lamp failure.
N O T E
You’re unable to reset the Display Hour value because it’s the running total of hours the
projector has been in use.
3. Press the Menu button on the remote control.
The Settings menu appears.
4.
Select to confirm that Lamp Hour is reset to zero.
To Next Page
Loading...
