Chapter 4
23 smarttech.com/kb/170549
Chapter 4: Maintaining your interactive
whiteboard system
Maintaining your interactive whiteboard 23
Preventing damage to your interactive whiteboard 23
Keeping the writing surface clean 24
Cleaning the projector 24
Focusing and adjusting the projector image 25
Replacing the projector lamp 26
Removing and replacing the projector lamp module 26
Resetting the lamp hours 29
This chapter includes methods for properly cleaning and preventing damage to your
SMARTBoard interactive whiteboard system.
Maintaining your interactive whiteboard
For information on maintaining your interactive whiteboard, see the
SMARTBoard M600
interactive whiteboard installation guide
(smarttech.com/kb/170555).
With proper care, your SMARTBoard interactive whiteboard will provide years of trouble-free
service.
Preventing damage to your interactive whiteboard
Although the surface of your interactive whiteboard is very durable, take the following precautions
to prevent damage.
l Don’t use sharp or pointed objects, such as ballpoint pens or pointers, as writing tools.
l Replace the pen nib when the nib wears out.
l Don’t use low-odor dry-erase markers because they can be very difficult to erase. Use
standard (high-odor) dry-erase markers that show a warning to use them only in well-ventilated
areas.
l Don’t use adhesive tape on the interactive surface.
To Next Page
Loading...
Need help?
General
