APPENDIX B
REMOTELY MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
73 smarttech.com/kb/170549
Field Possible values Description
target contactinfo = user string
current contactinfo user string
current modelnum user string Must match the OSD setting
current videomute
l
on
l
off
Must match the OSD setting.
target videomute
l
= on
l
= off
Must match the OSD setting.
current
vgaoutnetenable
l
on
l
off
Status of VGA Out Enable and Network Enable
target
vgaoutnetenable
l
= on
l
= off
Value for VGA Out and Network Enable
current
emergencyalertmsg
User string Emergency Alert message
target
emergencyalertmsg
= User string Set the Emergency Alert message
current
emergencyalert
l
on
l
off
To display the alert message, set this value to
“on.”
target
emergencyalertmsg
l
= on
l
= off
If the message is being displayed, “on” is
returned.
current signaldetected
l
true
l
false
If a signal is detected, “true” is returned.
Command List .... A list of commands appears. This list doesn’t
include service information commands.
Service Information
These commands are used in servicing and manufacturing the projector. They are hidden from the
user during normal operation.
Command/response definitions
Command Response Powered off
get displayhour displayhour=[current] no
To Next Page
Loading...
