CHAPTER 5
TROUBLESHOOTING YOUR INTERACTIVE WHITEBOARD SYSTEM
43 smarttech.com/kb/170549
Resetting the projector
At some point during troubleshooting, you might need to reset all projector settings.
IMPORTANT
This action is irreversible.
To reset all projector settings
1. Using the remote control, press the following buttons quickly to access the service menu:
Down, Up, Up, Left, Up.
2. Scroll to
Factory Reset
, and then press Enter on the remote control.
3. Scroll to
Exit
, and then press Enter on the remote control to exit the projector service menu.
Transporting your interactive whiteboard system
Save your original interactive whiteboard system packaging so that it’s available if you need to
transport your interactive whiteboard system. When required, repack it with all of the original
packaging. This packaging was designed to provide optimal shock and vibration protection. If you
no longer have your original packaging, purchase the same packaging directly from your
authorized SMART reseller.
If you prefer to use your own packaging materials, make sure you adequately protect your unit.
Make sure that the projector lens and mirror are protected against any physical contact or pressure
which may damage the projector’s optics. Ship your interactive whiteboard in an upright position to
deter shippers from placing heavy objects on it.
To Next Page
Loading...
Need help?
General
