SMART M600i6 - Field Definitions

APPENDIX B
REMOTELY MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
74 smarttech.com/kb/170549
Command Response Powered off
set testpattern [target] testpattern=[current] no
set colorwheelidx
[target]
colorwheelidx=
[current]
no
get colorwheelidx colorwheelidx=
[current]
no
get failurelog failurelog=[current] yes
get error# error#=[current] yes
set factoryreset
[target]
factoryreset=[current] yes
set highspeedfan
[target]
highspeedfan=
[current]
no
get highspeedfan highspeedfan=
[current]
no
set statereporting
[target]
statereporting=
[current]
yes
get statereporting statereporting=
[current]
yes
get poweroverride poweroverride=
[current]
no
set poweroverride
[target]
poweroverride=
[current]
no
Field definitions
Field
Possible Values
Description
current displayhour 0 to 20000 Current display hours.
target testpattern = 1 to 4 Set the test pattern to pattern number (1 to 4). If
there’s only one test pattern, call it test pattern
1.
current testpattern
l
1: Grid
l
2: Red
l
3: Green
l
4: Blue
l
5: Grey
l
6: Black
Test pattern being displayed. The built-in test
pattern can be changed.